Manual for B19-7 LED

Manual for B19-7 LED

Brand: Fujitsu

Category: Monitors

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:43 p.m.

Manual Publish Date: 2013-06-01

Warranty Information

No warranty information is explicitly provided in the scanned pages.

Your LCD screen...

  • TFT display (Thin Film Transistor; active matrix)
  • Minimal space requirements thanks to slim casing
  • LED background lighting
  • Optimum ergonomic characteristics
  • Landscape and portrait mode
  • High degree of brightness and good contrast
  • High resolution (1280 x 1024)
  • Presentation of up to 16.7 million colours
  • Automatic scanning of horizontal frequencies and refresh rates
  • Digital screen controller with microprocessor
  • Freely adjustable colour alignment
  • Convenient operation via integrated OSD menu
  • VESA-DDC compatibility
  • VESA-FPMPMI compatibility
  • Mounting device for swivel arm or similar accessory
  • Plug&Play capability
  • ECO function
  • Digital Video Input (DVI) with HDCP
  • Power management
  • Compliance with TCO 6.0 recommendations
  • Fulfills GS requirements

Getting started

  • Unpack and check the delivery
  • Set up the device
  • Set up an ergonomic video workstation
  • Mount the monitor base
  • Adjust height, inclination, rotation, and portrait format
  • Remove monitor base
  • Connect the device and cables to the computer

Operation

  • Switch the device on and off
  • Notes on power management
  • Change the monitor settings using the OSD menu

Troubleshooting and error codes

Having this problem? Check the following points:
No screen display
Power indicator does not light up
  • Check whether the power cable on the monitor is connected correctly.
  • Check whether the computer is switched on.
No screen display
Power indicator is lit
  • Check whether the computer is switched on.
  • Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
  • Press any key on the computer keyboard. The computer may be in power saving mode.
  • Alter the brightness and/or contrast until you get a picture.
Message: No Signal
  • Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
  • Check whether the computer is switched on.
Message:
Frequency out of range:
## kHz / ## Hz
Please change the display mode to 1280 x 1024 with 60 Hz
  • The input signal (horizontal frequency and refresh rate) at the displayed input does not correspond to the technical data for the monitor.
  • Adjust the video frequency range using the computer software (see documentation for the computer or display adapter).
  • Set a different screen resolution using the computer software (see documentation for the computer or display adapter).
Picture position not correct
  • The monitor recognises an undefined mode (see chapter "Technical specification", Page 33).
  • Press the AUTO button to conduct the auto-adjustment of the screen.
Picture is shaking
  • Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
  • Press the AUTO button to conduct the auto-adjustment of the screen.
Picture is wrongly adjusted
  • Run the Factory Recall function in the OSD menu. The Auto Processing message appears.
Picture disturbances (vertical lines)
  • Press the AUTO button to conduct the auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture noise)
  • Press the AUTO button to conduct the auto-adjustment of the screen.
The screen becomes darker
  • The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced.
  • Contact our Service Desk.
Privacy Policy