Manual for P27T-6 IPS

Manual for P27T-6 IPS

Brand: Fujitsu

Category: Monitors

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:25 p.m.

Manual Publish Date: 2010

Warranty Information

No specific warranty period is mentioned in the provided sections of the manual.

Getting Started

  • Unpacking and checking the delivery: Inspect all parts for damage and compare with the delivery note. Keep original packaging for future transport needs.
  • Setting up the device: Ensure adequate ventilation by keeping air inlets and outlets clear.
  • Setting up an ergonomic video workstation: Position the monitor to avoid glare from windows and light sources. Ensure the keyboard is easily reachable and the viewing distance is approximately 50 cm.
  • Adjusting height and inclination: Remove the transport fixing pin to adjust height up to 120 mm. Adjust inclination between -5° (forward) and +25° (back).
  • Removing monitor base: Switch off and unplug the monitor. Lay it on a soft surface, remove the cover and cables, then unscrew the base. This prepares it for swivel arm or wall bracket mounting.
  • Connecting the device: Observe safety information. Switch off the computer and unplug its power. Connect data, audio, and USB cables as instructed. Secure the cover.
  • Switching the device on and off: Use the ON/OFF switch. The LED indicator color signifies different states (blue for normal, green for ECO, orange for signal loss/basic power saving, off for power-off/0W power saving).

Operation

  • Notes on power management: The monitor supports computer power saving modes. The LED indicator color changes to reflect the power saving stage.
  • Adjusting the picture size and position: Use settings like Phase, Clock, H-Position, V-Position, Sharpness, Saturation, and Expansion to fine-tune the image.
  • Adjusting the volume: Set volume for integrated loudspeakers or mute them.
  • Setting colour temperature and colours: Choose from presets like sRGB, 6500 K, or AdobeRGB, or customize colour ratios.
  • Setting functions: Select input signal, language, enable/disable DDC-CI, set OSD timeout, or recall factory settings.
  • Displaying information: Access the Information setting window to view model designation, serial number, resolution, and other technical details.

Notes on ergonomic colour adjustment

  • Be mindful of colour combinations for characters and background to ensure adequate contrast (minimum 3:1) for readability, especially for text and data entry.

Troubleshooting and error codes

Having this problem? Check the following points:
No screen display
Power indicator does not light up		 Test whether changing the 0 W switch on the rear to the "1" position cures the problem.
Check whether the power cable on the monitor is connected correctly.
No screen display
LEDs not lit		 Check whether the computer is switched on.
Check whether you are using a DP or HDMI data cable and whether the 0 W switch is set to "I".
No screen display
Power indicator is lit		 Check whether the computer is switched on.
Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
Press any key on the computer keyboard. The computer may be in power saving mode.
Alter the brightness and/or contrast until you get a picture.
Message: No Signal Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
Check whether the computer is switched on.
Message: Frequency out of range:## kHz / ## Hz Please change the display mode to 2560 x 1440 with 60 Hz The input signal (horizontal frequency and refresh rate) at the displayed input does not correspond to the technical data for the monitor.
Adjust the video frequency range using the computer software (see documentation for the computer or display adapter).
Set a different screen resolution using the computer software (see documentation for the computer or display adapter).
Picture position not correct The monitor recognises an undefined mode (see chapter "Technical specification", Page 32).
Press the AUTO button to perform auto-adjustment of the screen.
Picture is shaking Check whether the data cable for the monitor is correctly attached to the monitor port on the computer.
Press the AUTO button to perform auto-adjustment of the screen.
Picture is wrongly adjusted Run the Factory Recall function in the OSD menu.
The Auto Processing message appears.
Picture disturbances (vertical lines) Press the AUTO button to perform auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture noise) Press the AUTO button to perform auto-adjustment of the screen.
The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced.
For DVI connection:
Despite the correct resolution of 2560 x 1440, small fonts are not sharp or are illegible and black font is shown coloured. (The information menu of the monitor shows a resolution of 1280 x 1440).		 Contact our Service Desk.
Use the DVI - Dual Link data cable which was supplied with the monitor.
Privacy Policy