Brand: GE
Category: Digital Camera
Document Type:
Language: EN
Available Languages: EN , ES
Manual for E1250TW
Uploaded: Aug. 9, 2025, 11:58 p.m.
Warranty Information
All trademarks mentioned in this manual are used for identification purposes only.
To turn on the camera, press the Power button. To turn off, press the Power button again. The LCD screen is a touch panel with integrated controls. Before using the camera, set the language and time in the Setup menu by pressing the power button, touching the 'TT' icon, and then the 'Camera setting' button. Scroll through menus using the touch screen. For time setup, navigate to Date/Time in the Camera Setting menu and use the up/down arrows to set. For language setup, select Language in the camera setup menu and use the arrow keys to find your language, then confirm with the OK button.
Troubleshooting and error codes
| Problem | Possible causes | Solution |
|---|---|---|
| Camera does not turn on. |
• The battery has run out.
• The battery is not inserted correctly. |
• Charge the battery or replace with a fully charged battery.
• Re-insert the battery observing the correct polarity. |
| Camera turns off suddenly during operation. |
• The battery has run out.
|
• Charge the battery or replace with a fully charged battery.
|
| The picture is blurred. |
• The lens is dirty.
• [O] appears when taking pictures. |
• Use a soft cloth to clean the lens on your camera
• Use the Image Stabilization mode. |
| Images, video clips, and audio files cannot be saved. |
• The memory card is full.
• No available space to store the files. • The mode dial is in Playback mode. |
• Replace the memory card with a new one.
• Delete unwanted images. • Unlock the memory card. |
| No picture is taken when pressing the shutter button. |
• The memory card is full.
• No available space to store the files. • The mode dial is in Playback mode. |
• Replace the memory card with a new one or clean off current memory card.
• Delete unwanted images. • The memory card is locked. • Turn the mode dial to any still shooting mode. |
| Images cannot print from the connected printer. |
• The camera is not connected to the printer correctly.
• The printer is not PictBridge compatible. • The printer is out of paper or out of ink. • The paper is jammed. |
• Check the connection between the camera and printer.
• Use a PictBridge compatible printer. • Load some paper in the printer. • Replace the ink cartridge in the printer. • Remove the jammed paper. |