Brand: GE
Category: Digital Camera
Document Type:
Language: EN
Manual for G2/A735/A835/A1030/A1230 E840s/E1035/E1235
Uploaded: Aug. 9, 2025, 11:57 p.m.
- Unpacking: Your package should contain the camera model you purchased along with accessories. Contact your vendor if anything is missing or damaged.
- Camera Views: Familiarize yourself with the front, back, and side views of your specific camera model (G2, A735/A835, A1030/A1230, E840s, E1035/E1235) by referring to the labeled diagrams.
- Charging the Battery: Place the battery into the charger, connect the cable to the charger base and then to a wall outlet. Charge until the light turns green. The first charge should be at least 4 hours.
- Getting Started: Read the preface, copyright, and trademark information. Review safety precautions for handling the camera, batteries, and memory cards. Understand the symbols used in the manual.
Troubleshooting and error codes
| Problem | Possible causes | Solution |
|---|---|---|
| Camera does not turn on. | • The battery has run out. • The battery is not inserted correctly. |
• Charge the battery or replace with a fully charged battery. • Re-insert the battery observing the correct polarity. |
| Camera turns off suddenly during operation. | • The battery has run out. | • Charge the battery or replace with a fully charged battery. |
| The picture is blurred. | • The lens is dirty. • [icon] appears when taking pictures. |
• Use a soft cloth to clean the lens on your camera • Use the Image Stabilization mode. |
| Images, video clips, and audio files cannot be saved. | • The memory card is full. | • Replace the memory card with a new one. • Delete unwanted images. • Unlock the memory card. |
| No picture is taken when pressing the shutter button. | • The memory card is full. • No available space to store the files. • The mode dial is in Playback mode. |
• Replace the memory card with a new one or clean off current memory card. • Delete unwanted images. • The memory card is locked. • Turn the mode dial to any still shooting mode. |
| Images cannot print from the connected printer. | • The camera is not connected to the printer correctly. • The printer is not Pict-Bridge compatible. • The printer is out of paper or out of ink. • The paper is jammed. |
• Check the connection between the camera and printer. • Use a PictBridge compatible printer. • Load some paper in the printer. • Replace the ink cartridge in the printer. • Remove the jammed paper. |