Brand: GE
Category: Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for GTD72EBSN0WS
Uploaded: Nov. 21, 2025, 6:30 p.m.
Manual Publish Date: 2019-06-01
Warranty Information
This dryer has a one-year limited warranty covering defects in materials or workmanship.
Getting Started:
1. Clean lint filter, add items loosely, close door. Note: Dryer won't start with door open.
2. Press Power button to wake up the display.
3. Select a dry cycle (defaults can be adjusted).
4. Press Start/Pause button to begin. Ensure the dryer is properly vented for best performance.
1. Clean lint filter, add items loosely, close door. Note: Dryer won't start with door open.
2. Press Power button to wake up the display.
3. Select a dry cycle (defaults can be adjusted).
4. Press Start/Pause button to begin. Ensure the dryer is properly vented for best performance.
Troubleshooting and error codes
| Problem | Possible Causes | What To Do |
|---|---|---|
| Dryer shakes or makes noise | Some shaking/noise is normal. Dryer may be sitting unevenly. | Move dryer to an even floor space, or adjust leveling legs as necessary until even. |
| Clothes take too long to dry | Improper or obstructed ducting | Check the Installation Instructions to make sure the dryer venting is correct. Make sure ducting is clean, free of kinks and unobstructed. Check to see if outside wall damper operates easily. |
| The Dry dryness level was chosen but load is still damp | Load consists of a mixture of heavy and light fabrics | When combining heavy and light fabrics in a load, choose More Dry. |
| Dryer doesn't start | Control panel is "asleep" | This is normal. Press Power to activate the control panel. |
| No numbers displayed during cycle, only lights | Dryer is unplugged | Make sure the dryer plug is pushed completely into the outlet. |
| Time Remaining jumped to a lower number | The estimated time may change when a smaller load than usual is drying | This is normal. |
| Cannot make a selection and the dryer beeps twice | The dryness Level, Temp or option that you are trying to select is incompatible with the chosen dry cycle | This is normal. |
| Dryer is running but 00 is displayed in Time Remaining | The Wrinkle Care option was chosen | This is normal. During extended tumbling, the time remaining is not displayed. The extended tumbling option lasts approximately 60 minutes. |
| "Check Vent" light is on | Lint filter is full | Clean lint filter, dry a load on an automatic cycle and verify that light turns off. |