Brand: GE
Category: Microwave Oven
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 8:03 p.m.
One-year full warranty for manufacturing defects, plus a nine-year limited warranty on the magnetron tube.
This manual covers operating your GE SpacemakerXL Microwave Oven (Model JVM1350). It details safety precautions, operating instructions, and helpful information.
| Problem | Possible Causes | What to Do |
|---|---|---|
| Oven Will Not Come On | A fuse in your home may be blown or the circuit breaker tripped. | Replace fuse or reset circuit breaker. |
| Power surge. | Unplug the microwave oven, then plug it back in. | |
| Plug not fully inserted into wall outlet. | Make sure the 3-prong plug on the oven is fully inserted into wall outlet. | |
| "PLEASE INSERT PROBE" Appears on Display | Probe has been forgotten or not inserted properly in the oven wall when using the Temp Cook or Roast function. | Insert the probe properly into the wall receptacle. |
| "SENSOR ERROR" Appears on Display | During Sensor Cooking, Reheat, or Popcorn program, the door was opened before steam could be detected. | Do not open door until steam is sensed and time is shown counting down on display. |
| Steam was not detected in maximum amount of time. | Use Micro Cook to heat for more time. | |
| Floor of Oven is Warm, Even When the Oven Has Not Been Used | The cooktop light is located below the oven floor. When the light is on, the heat it produces may make the oven floor get warm. | This is normal. |
| "BAD PROBE" Appears on Display | The probe has not been completely inserted into the wall receptacle. | Insert the probe properly into the wall receptacle. |
| The probe is defective. | Replace the probe. | |
| Food Amount Too Large for Sensor Reheat | Sensor Reheat is for single servings of recommended foods. | Use Micro Cook for large amounts of food. |
| You Hear an Unusual, Low-Tone Beep | You have tried to start the REMINDER without a valid time of day. | Start over and enter a valid time of day. |
| You have tried to start the AUTO NITE LIGHT without a valid time of day entered for the on-time and off-time. | Start over and enter a valid time of day. | |
| You have tried to turn the turntable on when the probe is in use. | The turntable will not operate when the probe is in use. | |
| You have tried to change the power level when it is not allowed. | Many of the oven's features are preset and cannot be changed. | |
| "LOCKED" Appears on Display | The control has been locked. (When the control panel is locked, an "L" will be displayed.) | Press and hold CLEAR/OFF for about 3 seconds to unlock the control. |