Manual for 21838

Brand: GE

Category: Other

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:05 p.m.

Getting Started

Install and Charge the Batteries

Insert two AAA batteries into the compartment, ensuring correct polarity. Close the compartment. Place the handset in the base station to charge for 16 hours before first use for optimal battery performance.

Features

This sophisticated cordless telephone offers:

Digital cordless technology (DECT)
Operation in 10 languages
Teleconference
Call forwarding
Internal communication between handsets
Caller ID with phone book storage
Alphanumeric LCD display
Extended redialing
And much more...

Using the Handset Telephone

Selecting the Language

In standby mode, navigate through the menu to select your preferred language from the available options.

Making Internal Calls

Ensure more than one handset is registered. Press 'INT/OK', select the handset number (1-4), and initiate an internal call.

Making External Calls

For normal dialing, press the key, wait for a dial tone, then dial the number. For on-hook dialing, dial the number first, then press the key.

Troubleshooting and error codes

PROBLEMS	CAUSES	SOLUTIONS
Registration not work.	The battery is not sufficiently charged.	Charge the battery for 16 hours (see Battery Charging).
	Handset and base station were not prepare for registration.	Unplug and then plug in the power adapter.
No display.	The battery has not been charged.	Charge the battery or replace them (see Battery Charging)
No reactions to keystroke.	The keypad is locked.	Press * key longer than 2 seconds.
No radio connection to the base station: blinking!	The handset is outside the base station range.	Move closer to the base station.
	The handset is not registered.	Register the handset (see Registering Handset).
	The base station does not work.	Unplug and then plug the power adapter to the power outlet (230V AC / 50 Hz) and the other end into the power jack on base bottom.