Manual for 28115

Manual for 28115

Brand: GE

Category: Other

Document Type: Manual

Language: EN

Available Languages: ES , EN

Uploaded: Nov. 21, 2025, 6:39 p.m.

Warranty Information

Covers defects in materials and workmanship for one year from the date of purchase.

Basic Phone Operation

  • Making a Call: Press "talk" or "speaker", then dial the desired number. Alternatively, dial the number first, then press "talk" or "speaker".
  • Answering Calls: When the phone rings, press "speaker" or pick up the handset and press "talk".
  • Ending a Call: Press the "end" button.
  • Volume Adjustment: During a call, use the "vol/CID" (up/down) buttons to adjust the receiver volume.
  • Intercom: Allows conversations between handsets without using the phone line.
  • Paging: Helps locate a misplaced handset.
  • Mute: Silences your microphone during a conversation.

Visual Indicators

  • Charge Indicator on Base: Stays lit when a handset is charging.
  • In Use Indicator on Base: Flashes for incoming calls, paging, or message waiting; stays lit when the line is in use.

Troubleshooting and error codes

ProblemPossible Solutions
Nothing appears on the display (Caller ID)
  • Charge the battery completely.
  • Ensure the unit is plugged into an outlet that cannot be turned off by a switch.
  • Subscribe to Name/Number service from your local phone company.
Error in Caller ID Message
  • This message indicates line noise.
    • No dial tone
    • Check installation and connections.
    • Ensure the handset is within range of the base.
    • Charge the battery adequately (12 hours).
    Handset does not ring
    • Check the ringer switch position.
    • Move closer to the base.
    • Temporarily disconnect other phones.
    • Check for dial tone.
    Static, noise, or weak incoming sound
    • Move closer to the base.
    • Ensure the base is not plugged into an outlet with other electronic devices.
    • Charge the battery.
    Unit emits "beeps"
    • Place the handset on the base for 20 seconds to reset.
    • Clean the charging contacts.
    • Refer to solutions for "No dial tone".
    • Change the battery.
    Memory Dial function does not work
    • Verify memory programming.
    • Ensure you followed the correct dialing sequence.
    Unit locks up and no communication
    • Unplug the power adapter and battery, wait 30 seconds, then plug back in and charge.
    Privacy Policy