Brand: GE
Category: Other
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 45234
Uploaded: Nov. 21, 2025, 6:17 p.m.
Warranty Information
One-year limited warranty covers manufacturing defects, limited to repair or replacement.
Basic Operation:
1. Connect Receiver: Connect the receiver to your TV using the AV cable. Plug in the AC adapter for the receiver.
2. Position Camera: Place the camera in your desired indoor/outdoor location. Connect the AC adapter to the camera.
3. Channel Selection: On the camera, set the channel switch to 1 or 2. On the receiver, select the corresponding channel. For two cameras, assign each to a different channel (1 or 2).
4. Adjustments: Adjust the camera and receiver antennas for the clearest picture. Angle the camera as needed.
5. Night Vision: The camera automatically switches to night vision in low light conditions (up to 10 ft).
6. Audio Detection: The system can alert you when sound is detected. Sensitivity can be adjusted.
7. Auto Mode: For two cameras, the receiver can automatically switch between them.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| No camera picture |
1. Check all connectors and power. 2. Ensure camera(s) and receiver are on correct channels. 3. Ensure camera is within range. 4. Adjust antennas. |
| Blank monitor |
1. Ensure receiver/monitor is ON and correct input selected. 2. Check AC adapter connection. 3. If using battery, ensure it is installed and charged. |
| Interference on camera picture |
1. Ensure camera is within range and no obstructions. 2. Reposition camera/receiver. 3. Move antenna away from receiver if camera is close. 4. Reposition other 900MHz devices. 5. Adjust antennas. |
| Audio problems |
1. Ensure monitor/TV volume is up. 2. Ensure sound is within microphone range. 3. Move camera away from receiver or angle receiver differently if feedback occurs. |