Installation Guide for GEPS24-100U-GL

Installation Guide for GEPS24-100U-GL

Brand: GE

Category: Other

Document Type: Installation Guide

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:26 p.m.

Warranty Information

24 month warranty period.

Before You Begin

Read these instructions completely and carefully.

Risk of Electric Shock

  • Disconnect power at fuse box or circuit breaker before servicing or installing product.
  • Properly ground Tetra® power supply.

Risk of Fire

  • Use only Tetra® supply wire to make connection from Tetra® power supply to Tetra® LED strip.
  • Use only approved wire for input/output connection. Minimum size 18 AWG (0.82 mm²).
  • Follow all local codes.

Power Supply Installation

  1. Connect the AC line to the brown (line) and blue (neutral) input wires of the power supply using 18-14 AWG (0.82-2.08 mm²) or 18-10 AWG (0.82-5.26 mm²) twist-on wire connectors.
  2. Connect the supply wire that is attached to the Tetra LED System to the red (+) and black (-) output wires of the power supply as outlined in the "Electrical Connections" section of your LED system's Installation Instructions.
Privacy Policy