Brand: GE
Category: Other
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for In-wall Wireless Smart Switch
Uploaded: Nov. 21, 2025, 6:01 p.m.
Tools You Will Need
- Screwdriver (Phillips head)
- Wire strippers
- Pliers
Installation Steps
- Turn OFF power at the circuit breaker or fuse box.
- Remove the existing wall plate and switch.
- Disconnect wires from the old switch, noting their positions.
- Connect the wires to the new smart switch according to the wiring diagram.
- Green wire to Ground
- Black wire to Line (Hot)
- Red or White wire to Load
- Mount the smart switch in the electrical box.
- Attach the new wall plate.
- Turn ON power at the circuit breaker or fuse box.
- Follow the app instructions to pair the switch.
Troubleshooting and error codes
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Switch does not turn ON/OFF | Power is OFF at the circuit breaker. | Turn ON power at the circuit breaker or fuse box. |
| Switch does not respond to remote control or app. | Switch is not paired. | Follow the pairing instructions in the app. |
| Switch is not recognized by the system. | Wiring is incorrect. | Turn OFF power. Verify wiring connections match the diagram. |
| LED indicator is not lit. | Power is OFF. | Turn ON power at the circuit breaker or fuse box. |
| Switch feels warm. | Normal operation under load. | This is normal and indicates the switch is functioning. |