Brand: GE
Category: Other
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for ZW4106
Uploaded: Nov. 21, 2025, 8:05 p.m.
Warranty Information
No warranty information is provided in this manual.
Setup and Pairing: Plug the device into a grounded outlet (top outlet recommended). Connect your desired lamp or appliance to the Z-Wave controlled outlet. To add to a Z-Wave network, follow your controller's instructions, then press and release the manual/program button on the switch. To remove, follow controller instructions and press/release the button.
Manual Control: Press and release the top button to manually turn connected devices ON or OFF.
LED Indicator: The LED turns ON when the connected light is OFF (default). To change: Parameter 3=1 (ON when light is ON), Parameter 3=2 (LED always OFF).
Advanced Features: Requires an advanced Z-Wave controller for settings like All On/All Off commands.
Reset: Press and hold the top button while plugging into AC power for at least 3 seconds.
Manual Control: Press and release the top button to manually turn connected devices ON or OFF.
LED Indicator: The LED turns ON when the connected light is OFF (default). To change: Parameter 3=1 (ON when light is ON), Parameter 3=2 (LED always OFF).
Advanced Features: Requires an advanced Z-Wave controller for settings like All On/All Off commands.
Reset: Press and hold the top button while plugging into AC power for at least 3 seconds.