Brand: GE
Category: Refrigerator
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for FUF14, FUF17, FUF21
Uploaded: Nov. 21, 2025, 6:02 p.m.
Warranty Information
GE Appliances provides a one-year limited warranty on parts and labor for defects in materials or workmanship.
Starting the Freezer: Connect to power. The display will show 0°F. Press '-' or '+' to adjust temperature. Press both buttons simultaneously for 3 seconds to switch between °F and °C. Allow 4 hours before adding food.
Temperature Control: Use '-' to decrease and '+' to increase temperature. Allow several hours for stabilization. The High Temp alarm will sound if the temperature rises too high. Press 'Alarm Reset' to silence.
Turbo Freeze: Press 'Turbo Freeze' until the ON light is lit. It runs for 8 hours automatically. Press again to turn off.
Control Lock: Press and hold 'Control Lock' for 3 seconds to lock/unlock controls.
Troubleshooting and error codes
| Problem | Possible Causes | What to Do |
|---|---|---|
| Freezer does not operate | Freezer is unplugged. | Push the plug completely into the outlet. |
| The fuse is blown/circuit breaker is tripped. | Replace fuse or reset the breaker. | |
| "Demo" LED light is on and Freezer is in Demo mode. | Please press "Alarm Reset” first, and then press the "-" and "+" immediately while holding "Control Lock" at the same time for 5 seconds and release. "Demo" LED light will be off. | |
| Freezer starts/stops too frequently | Door left open. | Check to see if package is holding door open. |
| Too frequent or too long door openings. | Open the door less often. | |
| Freezer operates too long | Door left open. | Check to see if package is holding door open. |
| Too frequent or too long door openings. | Open the door less often. | |
| Temperature control set too cold. | See Temperature Control. | |
| Inadequate air circulation space around cabinet. | See Installing the Freezer. | |
| Room or outside weather is hot. | It's normal for the freezer to work harder under these conditions. | |
| Noisy operation or cabinet vibrates | Floor may be weak, causing freezer to vibrate when compressor is on. | Check to make sure freezer is located on solid floor and adjust leveling legs as needed. |
| Cabinet is not positioned solidly on floor. | Adjust legs. See Installing the Freezer. Or use shims for uneven floor. | |
| Freezer is touching the wall. | Level freezer or move slightly. See Level Freezer. | |
| Freezer temperature too warm | Door left open. | Check to see if package is holding door open. |
| Too frequent or too long door openings. | Open the door less often. | |
| Temperature control is set too warm. | Turn control to a colder setting. Allow several hours for the temperature to stabilize. | |
| Foods defrosting | Large amounts of warm or hot food may have been stored recently. | Wait until the freezer has had a chance to reach its selected temperature. |
| Freezer requires 4 hours to cool down completely. | Freezer requires 4 hours to cool down completely. | |
| High temp alarm is on and temperature display is flashing. | Power outage may have caused high internal temperature. | |
| Freezer temperature too cold | Freezer is unplugged. | Push the plug completely into the outlet. |
| The fuse is blown/circuit breaker is tripped. | Replace fuse or reset the breaker. | |
| Door left open. | Check to see if package is holding door open. | |
| Too frequent or too long door openings. | Open the door less often. | |
| Temperature control set too cold. | See About the operation of your freezer. |