Brand: GE
Category: Television
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 13GP243
Uploaded: Nov. 21, 2025, 7:09 p.m.
Warranty Information
Covers defects in material/workmanship for 90 days labor, 1 year parts, and 2 years picture tube.
Getting Started: Unpack TV and accessories, place batteries in the remote, connect antenna or cable-TV system, and plug in the TV. Turn on the TV to automatically place channels in memory. Edit channel memory to add or erase channels. Set the clock by pressing MENU repeatedly until SETUP is highlighted, then press + to select the SETUP menu, and then repeatedly press MENU to select CLOCK. Press and hold - to set the correct hour and + to set the correct minutes.
Troubleshooting and error codes
| TV Trouble | Checks and Adjustments |
|---|---|
| TV will not turn on |
• Check to make sure it is plugged in. • Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else. • Maybe batteries in remote are "dead". Try using the POWER button on TV. • Maybe remote control was not aimed at remote sensor. |
| Controls don't work | • Try unplugging set for 15 minutes and then turning it on again. |
| Intermittent or no remote |
• Maybe something is between the remote and the remote sensor. • Maybe batteries in remote are weak or dead. Try replacing batteries. • Maybe batteries are installed incorrectly. Try replacing batteries correctly. • Remove batteries and hold down one or more buttons for several seconds. Install the batteries and try remote. |
| Turns off while playing |
• Sleep Timer function may be activated. • If TV turned on because of alarm, it will automatically turn off after one hour. • Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the voltage in your house may be abnormally high. |
| Turns on unexpectedly | • Alarm function may be turned on. |
| Blank screen | • Try another channel. |
| No sound, picture okay |
• Maybe sound is muted. Try pressing VOL up button to restore sound. • If headphones are connected, sound from TV speakers will be muted. |
| Can't select certain channel |
• Channel may not be in channel memory. Try using number buttons. • If using VCR, check to make sure TV/VCR switch on VCR is in correct position. • To select cable-TV channels over 99 (up to 125), press and hold number button 1 until 1- appears on the screen. Then press the other two numbers. |
| No picture, no sound | • If watching VCR (connected through antenna input), make sure TV is tuned to channel 3 or 4-same as CH3/CH4 switch on VCR. Also check to make sure TV/VCR switch on VCR is in correct position. |
| Sound okay, picture poor |
• Check antenna connections. • Try adjusting SHARPNESS function to improve weak signals. |
| Picture okay, sound poor | • Try another channel. |
| Improper color in one or more areas of the picture | • Try unplugging set for a minimum of 15 minutes and then turning it on again. For best results you should place the set in the position you will be watching it before you plug it back in. |
| Closed captioning doesn't work |
• Make sure closed captioning is turned on to either C1 or C2. • Closed captioning appears on the screen only if the program being broadcast has closed captioning. |