Manual for 3-Device HDMI Switch

Brand: GE

Category: Universal Remote

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8 p.m.

Manual Publish Date: 2021-03-01

Warranty Information

This Jasco product comes with a limited-lifetime warranty.

Basic Operation:

Switching Devices: Use either the Power/Select button on the switch or the remote control to cycle through connected HDMI devices. The blue LED on the switch indicates the active input.

Manual Operation: Power on the TV and switch. Select the desired HDMI device. Press the play button to view. To turn off, cycle through inputs until the blue LED is no longer illuminated.

Remote Operation: Power on the TV and switch. Use the numbered input buttons (1, 2, or 3) on the remote to select the desired device. Press the red power button to turn off.

Battery Replacement: Remove the screw, slide out the battery tray, replace the CR2025 battery with the positive (+) side up, reinsert the tray, and replace the screw.

GE Universal Remote: Use code 4611 for programming.

Troubleshooting and error codes

Problem	Solution
LED is not illuminated on the switch:	Make sure the AC/DC power supply is plugged into a working outlet. If AC/DC power adapter is plugged into a surge protector, make sure the surge protector is powered on. Make sure the DC plug is plugged completely into the switch. Make sure the power is turned on, by pressing the Power/Select Button (Input 1 should be illuminated). Unplug and plug the AC/DC power adapter and press the Power/Select Button (Input 1 should be illuminated).
Has audio but no video:	Make sure this is not a copied DVD movie, the enabled HDCP protection will block the copied DVD movie from playing. Make sure the HDMI® cable is completely plugged into the DVD player and the switch. Make sure the HDMI® cable is completely plugged into the Out port of the switch and into the TV's HDMI® port. Replace the HDMI® cable either from the DVD player to the switch or the HDMI® cable from the switch to the TV or replace both cables.
Has video but no audio:	Make sure the volume is turned up on the TV. Make sure the MUTE function is turned off on the TV. Replace the HDMI® cable either from the DVD Player to the switch or the HDMI® cable from the switch to the TV or replace both cables.
Remote control does not work:	Make sure the battery is properly installed with (+) facing upward. Replace battery. Make sure all protective film is removed from the remote and switch. Make sure the remote is pointed at the front of the switch. Make sure there are no obstructions between the remote and the switch.
HDMI® switch will not operate manually:	Make sure the AC/DC power adapter is plugged into a working outlet. Make sure the DC plug is plugged completely into the switch. Use only the AC/DC power adapter that is included with the switch. Unplug and plug the AC/DC power adapter from the switch and press the Power/ Select button (Input 1 should be illuminated). If the AC/DC power adapter is plugged into a surge protector, make sure the surge protector is powered on.