Manual for NR-9300

HEED THE FOLLOWING

Read the operating instructions carefully before using the unit and be sure to use it properly. After reading the instructions, store them in an easily accessible place so they can be consulted whenever necessary.

WARNING

• Continued use should there be an irregularity (smoke, abnormal smell or sound, etc.) will lead to fires or electric shocks. If there should be an irregularity, immediately turn off the power of the computer on which the unit is installed and request servicing.
• Do not disassemble or modify the unit in any way. Doing so will lead to fires or electric shocks.
• Make sure that no foreign objects get in the unit, as this will lead to fires or electric shocks. If a foreign object should get in the unit, immediately turn off the power of the computer on which the unit is installed and request servicing.
• Do not let fluids get in the unit or let the unit get wet, as this will lead to fires or electric shocks. If fluid should get in the unit, immediately turn off the power of the computer on which the unit is installed and request servicing.
• Do not use with any power voltage other than the indicated voltage. Doing so will lead to fires or electric shocks.
• Do not store or use the unit in places where it may be subject to shocks or strong vibrations. Doing so will lead to fires or electric shocks.
• Do not store or use the unit in places where it may be exposed to chemicals or chemical vapors. Doing so will lead to fires or electric shocks.

CAUTION

• When connecting computer equipment, audio equipment, speakers, etc., be sure to read the respective manuals carefully, turn of the power and follow the connection instructions. Using cords other than the specified cords or extending cords could generate heat and result in burns, etc.
• Set the volume to the minimum before turning on the power. Sudden bursts of loud sound could result in hearing impairment.
• Do not store or use the unit in extremely hot places or places where the humidity fluctuates greatly. Doing so could lead to fires or electric shocks.
• Do not store or use the unit in places exposed to direct sunlight or near equipment that generates heat. Doing so could lead to fires.
• Do not place the unit on unsteady tables, slanted surfaces or other unstable surfaces. The unit could fall or tip over, resulting in injury.
• Do not store or use the unit in humid or dusty places. Doing so could lead to fires or electric shocks.
• Do not store or use the unit with heavy objects or objects that stick out passed the frame on top of it. The object or unit may lose its balance and tip over or fall, resulting in injury.
• Do not let stick your hands into the disc insertion slot, as this could cause injury.
• Do not use cracked or misshapen discs or discs that have been repaired with adhesives, etc. Discs rotate at high speeds inside the unit. If such discs are used, they may break and fly out, resulting in injury.
• Do not look directly at the laser source. Exposing the eyes to the laser beam could result in vision impairment.
• When used near a radio or TV, the unit may generate noise in the radio or TV. Also, if there is equipment generating strong magnetic forces nearby, this may generate noise in the unit.
• Keep the disc tray closed except when inserting or removing discs in order to prevent injury from bumping into the disc tray.
• When disconnecting from computer equipment, wait to remove a couple of minutes until it gets cold. The enclosure may have some points over 60°C.

Cautions

Cleaning

To clean the CD-R/RW drive, wipe it with a soft, damp cloth, using mild detergent if necessary. Please avoid using solvents such as benzine or paint thinner. This can cause color changes or deformation of CD-R/RW drive.

Handling the Disc

• Do not touch the data side of the disc (the side of the disc with no label or printing).
• Do not apply paper labels or write on any part of the disc, data side or label side. Do not use the disc leaved a mark strip paper labels.
• If dust or fingerprints get on the disc, wipe it with a soft cloth from the center to the edge.
• Do not use benzine, paint thinner, record cleaner, or static repellent. This can damage the disc.
• Do not place the disc in any place where it will be subjected to direct sunlight or high temperatures.