Brand: Generic
Category: Digital Camera
Document Type: Manual
Language: EN
Manual for Wireless Camcorder
Uploaded: Aug. 10, 2025, 12:31 a.m.
Warranty Information
Warranty information is not explicitly stated in this manual.
- Charging the Unit: Fully charge the camera before initial use via the power adapter or USB. The status indicator flashes red while charging and turns off when fully charged.
- Modes Navigation: Press the Power button to turn on the camera. Press the Mode button to switch between Video-Direct Mode, Photo-Direct Mode, and Cloud Mode.
- Camera Modes: Insert a micro SD card (sold separately). Select Video Mode to record video by pressing the Record button. Select Photo Mode to take pictures by pressing the Record button.
- Wireless Modes: Download the [Unieye] app for mobile use or install [PC APP] for computer use.
- Direct Mode: Connect the camera to your mobile or PC for remote control, live viewing, and album management.
- Cloud Mode: Connect the camera to a cloud server via an access point or mobile hotspot for internet video or live monitoring.
Troubleshooting and error codes
| Situation | Cause/Solution |
|---|---|
| Camera cannot turn on | Battery power is low. Recharge the battery. |
| Camera is frozen | Press Power button for 5 sec. to turn off. Press Power button twice to turn on. |
| Camera cannot record | No SD card or SD card is full. SD card cannot be recognized. Format SD card in [Unieye] or replace SD card. |
| Camera not found | Turn on camera, switch to Direct Mode. Press "Refresh" on mobile or PC to scan again. |
| Forgot camera password | Press both Mode and Record buttons for 5 sec. to reset. |
| Cannot watch live view | Move camera closer to mobile. |
| Flickering segments on live view | TV system setting (50Hz/60Hz) is incorrect. |
Cloud Warning:
| Alert | Cause/Solution |
|---|---|
| One time | Cannot connect to cloud AP or invalid network password. Camera not inside WiFi area or weak signal. Check AP settings or move camera closer to cloud AP. |
| Two times | No internet or the cloud server is not accessible. Cannot log in cloud server via internet. Cloud service may be blocked by firewall. |
| Three times | Cloud server username or password is incorrect. Refer to i in [Setup] for instructions. Username already taken. Create new account in [Unieye]. |