Brand: Generic
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 14-30R
Uploaded: Sept. 12, 2025, 4:31 a.m.
Warranty Information
One year limited warranty covering defective parts and workmanship. Excludes damage from misuse, unauthorized service, or cosmetic issues.
Dryer Operation Guide
Preparing the Load: Separate items by fabric type, weight, and color. Ensure buckles, zippers, and fasteners are secured. Turn pockets inside out and check for stains. Place small items in a mesh bag. Ensure the lint screen is clean and in place.
Loading the Dryer: Fill the drum 1/3 to 1/2 full to allow items to tumble freely. Avoid overloading. For delicate or very small loads, add lint-free towels. Do not overdry.
Starting the Dryer: Select the desired cycle by turning the cycle selector clockwise. Push the Start Button for 2 seconds or turn the START knob clockwise to ON and hold for 1-2 seconds. The dryer will stop when the door is opened.
After the Cycle: Remove items immediately and hang or fold to prevent wrinkling.
Troubleshooting and error codes
| OCCURRENCE | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Dryer does not start. | Electrical power cord is not securely plugged in or plug may be loose. | Make sure the plug fits tightly in wall outlet. |
| House fuse blown or circuit breaker tripped. | Reset circuit breaker or replace fuse. | |
| Dryer runs but won't heat. | Thermal limiter tripped. | Call authorized service person for replacement. |
| There are 2 house fuses in the dryer circuit. If 1 of the 2 fuses is blown, the drum may turn but the heater will not operate. | Replace fuse. | |
| Gas supply valve is not open (gas models). | Check to make sure supply valve is open. See INSTALLATION INSTRUCTIONS for procedure. | |
| Drying cycle takes too long, outside of the dryer feels too hot or smells hot. | Lint screen is clogged with lint. | Make sure all lint has been removed from the dryer lint screen before starting each cycle. |
| Exhaust duct requirements have not been met. | Exhaust duct must be at least 4 inches in diameter and made of rigid or flexible metal. | |
| Excessive wrinkling. | Dryer is overloaded. | Do not overload. See Drying Procedures. |
| Items left in dryer too long. | Remove items as soon as cycle ends. | |
| Scratching or chipping of the drum finish. | Foreign objects such as coins, pins, clips or buttons are inside the dryer. | Always remove foreign objects from pockets before laundering. Remove objects from drum and restart dryer. |