Brand: Generic
Category: Home Appliances
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for 30" & 36" Models
Uploaded: Sept. 12, 2025, 4:30 a.m.
Warranty Information
Refer to the Use and Care Guide for warranty information.
Safe Installation Practices
- Ensure proper grounding of the appliance.
- Follow all local codes and ordinances for installation.
- Do not store flammable materials near the appliance.
- Ensure adequate ventilation during operation.
Gas Supply and Connection
- Connect to a properly sized gas supply line (1/2" or 3/4").
- Install an approved manual shutoff valve.
- Use pipe-joint compound for gas connections.
- Check for leaks using a manometer or leak detector.
- The cooktop is designed for natural gas at 5" of manifold pressure.
Electrical Requirements
- Requires a 120-volt, 60-hertz, properly grounded branch circuit.
- Protected by a 15-amp circuit breaker or time delay fuse.
- Do not use an extension cord.
Operation Check
- Remove foam caps.
- Turn on electrical power and main shutoff gas valve.
- Check igniters by pushing and turning knobs to LITE.
- Adjust burner flame size as needed.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite | No gas supply | Check gas shutoff valve. |
| Ignition system failure | Check electrical connection and igniter module. | |
| Clogged burner ports | Clean burner ports. | |
| Flame too high or low | Incorrect gas pressure | Adjust gas pressure regulator. |
| Improper air mixture (not applicable to surface burners) | Refer to specific burner adjustment instructions if applicable. | |
| Gas odor | Gas leak | Immediately turn off gas supply, ventilate the area, and call the gas supplier or fire department. DO NOT use any electrical switches or phones. |