Brand: Generic
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for CM-06DN
Uploaded: April 20, 2026, 8:12 p.m.
Warranty Information
Warranty information is not explicitly stated in this section of the manual.
1. Call and Answer: When a visitor presses the call button on the door station, the indoor phone rings and displays the visitor's image. The host can pick up the handset (or push TALK button on hand-free models) to answer. Conversation is limited to 120 seconds. If unanswered, the image disappears after 30 seconds.
1.2 Door Unlock: During a conversation, the host can push the Unlock button to open the door for visitors.
2. Surveying Entrances: Push the MONITOR button to view the entrance situation. The display can stay on for 30 seconds. You can switch between two door stations if available. To survey again within 10 seconds, push MONITOR again.
3. Intercom Between Indoor Phones: If multiple indoor phones are connected, push the CALL button on one indoor phone. All other indoor phones will ring. Answering on one phone stops the ringing on others. Intercom is available between the first two phones that connect. Conversation time is unlimited.
Troubleshooting and error codes
| Problem | Reason | Solution |
|---|---|---|
| Door station and indoor phone cannot connect. | 1. Wire connection error. | Check the wire connection is correct. |
| 2. Power supply is insufficient. | Check if the power supply is sufficient. | |
| Door station and indoor phone cannot connect. | 3. The distance is too far. | Use 75-5 video wire or extend the wire. |
| Indoor phone has no image. | 1. Wire connection error. | Check the wire connection is correct. |
| 2. Camera is damaged. | Replace the door station. | |
| 3. Power supply is insufficient. | Check if the power supply is sufficient. | |
| Indoor phone has no voice. | 1. Wire connection error. | Check the wire connection is correct. |
| 2. Speaker is damaged. | Replace the indoor phone. |