Manual for DW60BI

Manual for DW60BI

Brand: Generic

Category: Home Appliances

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:55 p.m.

Warranty Information

12 months parts and labour warranty for correctly installed and operated appliances in the UK.

Starting the Appliance

After installation, turn on the water supply, partially open the door, and press the ON-OFF button "A". The "B" indicator light will come on. Select a wash cycle using button "C"; each press will illuminate the next cycle indicator light "D". Close the door to begin the cycle; light "D" will blink. The cycle can be interrupted by opening the door (hear acoustic sound, lights flash). Close the door to resume. The cycle ends with six acoustic signals and light "D" turns off. Open the door, turn off the appliance and water supply. Wait a few minutes before removing dishes.

Cancelling or Modifying a Cycle

A cycle underway can only be modified if it has run for a short time. Open the door, press ON-OFF button "A" to turn off, then open the door. To set a new cycle, follow "Starting a Wash Cycle" instructions. If detergent has been used or water drained, the dispenser needs refilling.

Troubleshooting and error codes

Error message Have you checked whether:
Error display on the time-remaining indicator When all the programme indicators "D" blink. the door is closed properly.
When the programme indicators "D1,D2,D3" blink.
  • the water is turned on and the hose is connected properly;
  • the water supply to the house is on and has sufficient pressure;
  • the water supply hose is crimped or bent;
  • the filter for the water supply hose is clogged.
  • the drain hose is too low.
When the programme indicators " D1,D3,D5" blink.
  • the drain hose is crimped or bent.
  • the drain hose is too high.
Privacy Policy