Brand: Generic
Category: Notebook Computer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for V55LA-2
Uploaded: April 20, 2026, 8:13 p.m.
Warranty Information
Warranty information is not provided in this manual.
The V55LA-2 system board offers a 64-bit architecture supporting various Intel, Cyrix, and AMD CPUs. It features PCI local bus for high-speed peripherals, onboard Sound Blaster Pro-compatible audio, and expandable video memory. The board includes two PCI-enhanced IDE interfaces, serial ports, a parallel port, and PS/2 keyboard/mouse ports. Memory can be upgraded up to 128 MB using 72-pin SIMMs. The system also supports QuickStart power saving and has provisions for installing ISA cards. It provides troubleshooting guidance for various system and software error messages.
Troubleshooting and error codes
| Message | Action |
|---|---|
| CMOS Battery Error | Replace the RTC chip or contact your dealer. |
| CMOS Checksum Error | Check the RTC chip and the necessary jumper. If the battery is still good, run Setup. |
| Display Card Mismatch | Run Setup |
| Diskette Drive Controller Error or Not Installed | Check and connect the control cable to the diskette controller. |
| Diskette Drive Error | Diskette may be defective. If not, replace the diskette drive. |
| Diskette Drive A Type Mismatch | Run Setup and select the proper drive type. |
| Diskette Drive B Type Mismatch | Run Setup and select the proper drive type. |
| Equipment Configuration Error | Modify the memory configuration to agree with one of the options in Tables 1-6 or 1-7. |
| Hard disk Controller Error | Run Setup. |
| Hard disk 0 Error | Check all cable connections. Replace hard disk. |
| Hard disk 1 Error | Check all cable connections. Replace hard disk. |
| Keyboard Error or No Keyboard Connected | Check and connect the keyboard to the system unit. |
| Keyboard Interface Error | Replace the keyboard or contact your dealer. |
| Memory Error at: MMMM:SSSS:000 (W:XXXX, R:YYYY) where: M: MB, S: Segment, O: Offset, X/Y: write/read pattern | Check SIMMs on the system board. Contact your dealer. |
| CPU Clock Mismatch | Run Setup. Check if the CPU clock is correct. If correct, exit Setup and reboot the system. If the error message reappears, ask for technical assistance. |
| Onboard Serial Port 1 Conflict | Run Setup and disable the port. |
| Onboard Serial Port 2 Conflict | Run Setup and disable the port. |
| Onboard Parallel Port Conflict | Run Setup and disable the port. |
| Pointing Device Error | Check and connect pointing device. |
| Pointing Device Interface Error | Replace the pointing device or contact your dealer. |
| Press F1 key to continue or CTRL + ALT + ESC for Setup | Press F1 or CTRL + ALT + ESC to enter Setup. |
| Real Time Clock Error | Check the RTC chip. If it is still good, run Setup. If not, replace the RTC chip. |