Brand: gfm
Category: Digital Camera
Document Type:
Language: EN
Manual for GM726C
Uploaded: Aug. 9, 2025, 11:59 p.m.
Warranty Information
You can return this GFM product for a full refund within 6 months of purchase with a receipt.
- Turning the Power On and Off: Press the POWER button to turn the camera on or off.
- Changing the Mode: Use the MODE button to switch between REC and PLAYBACK modes.
- Selecting REC Mode: Press the MODE button to show the scene mode palette and use the four-way control to select a mode.
- Using the LCD Monitor: The LCD displays information and is used for composing images and reviewing footage. Press the SET/DISP button to change the LCD status.
- Making Connections: Connect the camera to a TV using the AV cable or to a PC using the USB cable.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| Power does not turn on. | Battery is inserted in the wrong direction. | Reload battery in the correct direction. |
| Batteries are dead. | Replace or recharge batteries. | |
| The battery compartment door is open. | Make sure the battery compartment door is securely closed. | |
| The camera does not take pictures. | The flash is charging. | Wait for the flash to charge. |
| Memory is full. | Insert a new memory card. | |
| Memory card is not formatted correctly. | The card may be defective, use a new card. | |
| Image is not recorded when the shutter button is pressed. | The flash is charging. | Wait for the flash to charge. |
| Memory is full. | Insert a new memory card. | |
| The flash does not fire. | Flash is set to OFF. | Set the flash to any mode except off. |
| Image is blurry or out of focus. | The camera was moving when the image was captured. | Hold the camera steady when shooting picture. |
| The subject was beyond the range within which the camera can focus. | Turn the Macro mode on if the subject is within 15 cm or 40 cm. Do not use Macro mode when shooting distant subjects. | |
| Image is not displayed on the LCD monitor. | A memory card with non-DCIF images (recorded with other camera) is loaded. | This camera cannot display non-DCIF images. |
| Recorded images are not saved in memory. | The camera was turned off / powered down before the image was stored in memory. | If the battery low indicator appears on the LCD monitor, replace the battery immediately. |
| Cannot transfer images to a computer after connecting the USB cable. | USB driver is not installed. | Install the USB driver before you connect the camera to a computer / turn the camera on. |
| Card error | The memory card format may not be correct. | Re-format the memory card to the FAT format using a card reader in Windows. |