Brand: gfm
Category: Digital Camera
Document Type:
Language: EN
Available Languages: EN , ES
Manual for TDC531K
Uploaded: Aug. 9, 2025, 11:59 p.m.
Warranty Information
Limited warranty covers defects for six months; excludes damage from misuse or accidents.
Camera Operation Summary
Taking Photographs: Turn on the camera, select photo mode (A), adjust macro switch based on distance (flower symbol for close-ups 0.4-0.6 ft, normal symbol for 1.6 ft-infinity). Use flash if needed. Aim using the LCD screen and press the shutter button. For self-timer, press MENU, select self-timer mode, set delay (2, 10, or 10+2 sec), press OK, then aim and press shutter.
Recording Video: Select video mode, press shutter to start/stop recording. Use MENU to set resolution, EV, and White Balance.
Playback: Press PLAYBACK button to select photos/videos. Use directional buttons to navigate and zoom. Press MENU for SLIDE SHOW.
Voice Recording: Select voice-record mode, press SHUTTER to start/stop.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| Cannot turn on the camera by pressing the "power" button. | Low battery power, battery is missing or incorrectly inserted. | Install or replace the battery correctly. |
| Photos are not saved or are missing when taking pictures. | The memory card or built-in memory hasn't been formatted properly in the camera. | Format the memory in SET mode of the camera. Please refer to section 5.3. |
| Cannot find removable disk after connecting the camera to the computer via USB. | 1. Connection failure. 2. The mode of the camera is not set to removable disk properly | 1. Make sure all cable connections are secured and restart the computer. 2. Set the camera to removable disk mode, refer to section 3 (system setting, USB connection) |
| Flash does not work. | Battery Power is too low. | Replace with new alkaline batteries. |
| The batteries used up easily | Used wrong type battery. | Replace with new alkaline battery. |
| The photos are over exposed. | Set the flash light to force mode in bright environment. | Set the Flash light to Auto mode. |
| The photos are blurry | 1. The camera is not held steadily. 2. The lens of camera is dirty. | 1. Hold the camera steady until it beeps when taking a photo. 2. Clean the lens with soft dry cloth. |
| Get a warning message: "Capture device was not detected" when trying to open as a PC cam. | 1. Conflict with another camera or video device. 2. The mode of the camera is not set to PC cam mode properly. | 1. Remove any other camera drivers completely from your system. Sometimes you have to re-install your system. 2. Set the camera to PC cam mode, refer to section 3 (system setting, USB connection) or section 6.3.2. |
| Cannot preview image in PC Camera mode. | "Preview" is not selected in option Menu in PC. | Click "preview" in the "option" menu to select it. |