Brand: Gigaset
Category: Telephones
Document Type: Manual
Language: EN
Brand: Gigaset
Category: Telephones
Document Type: Manual
Language: EN
Uploaded: Nov. 21, 2025, 7:05 p.m.
Manual Publish Date: 2010-08-31
This product is guaranteed against defects in materials or workmanship for 12 months from the date of purchase.
| Problem | Cause | Solution |
|---|---|---|
| Nothing appears in the display. | The handset is not switched on. | Press the end call key for approx. 5 seconds or place the handset in the base station. |
| The batteries are flat. | Charge or replace the batteries. | |
| The handset is not registered. | Register the handset page 10. | |
| The base station is not turned on. | Check the mains connector on the base station page 3. | |
| No wireless connection to the base station, Base flashes in the display. | The handset is outside the range of the base station. | Move the handset closer to the base station. |
| The handset is not turned on. | Press the end call key for approx. 5 seconds or place the handset in the base station. | |
| You cannot hear a ringer/dialling tone from the fixed line network. | The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack connections. | Please always use the phone cord supplied or ensure that the pin connections are correct when purchasing from a retailer: 3-4 assignment of telephone leads/EURO CTR37. |
| Error tone sounds after system PIN prompt. | You have entered the wrong system PIN. | Reset the system PIN to the default 0000 page 11. |
| PIN forgotten. | All handsets are de-registered. All settings are reset. All lists are deleted. |