Brand: GoPro
Category: Electronics
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HD HERO2
Uploaded: Aug. 10, 2025, 12:49 a.m.
Warranty Information
This product is guaranteed against manufacturing defects for one year from the original purchase date.
To power ON the HD HERO2: Press and release the POWER/MODE Button (P). The LED Recording Light on the front of the camera will flash three times and the Buzzer will emit three short beeps.
To power OFF the HD HERO2: Press and hold the POWER/MODE Button (P) for two seconds. The LED Recording Light will flash seven times and the Buzzer will emit seven quick beeps.
Camera Modes:
- VIDEO: Record video
- PHOTO: Take single photos
- BURST: Take 10 photos in 1 second
- TIME LAPSE: Take a photo every 0.5, 1, 2, 5, 10, 30, and 60 seconds
- SELF TIMER: Take a single photo after a 10-second countdown
- SETTINGS: Change the camera's configuration
Troubleshooting and error codes
| "NO SD" MESSAGE ON THE LCD | "NO SD" indicates that there is no SD card present. The HD HERO2 requires an SD card to record video or take photos. |
|---|---|
| FILE REPAIR ICON ON THE LCD | If you see the File Repair icon, your video file was corrupted during recording for some reason. Press any button and the camera will repair the file. |
| TEMPERATURE WARNING ICON ON THE LCD | The Temperature Warning icon will appear on the LCD when the camera has become too hot and needs to cool down. Simply let it sit and cool before attempting to use it again. Your camera will not allow itself to overheat—so do not worry, as no damage has occurred. |