Brand: GoPro
Category: Electronics
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HERO4 BLACK
Uploaded: Aug. 10, 2025, 12:48 a.m.
Charging the Battery:
1. Remove the camera from The Frame.
2. Insert a microSD card (sold separately) with Class 10 or UHS-1 rating (up to 64GB) into the camera side door.
3. Open the bottom door, insert the battery, and close the door.
4. Connect to a computer or USB charger using the included USB cable. Status light indicates charging.
Powering On/Off:
To Power On: Press the Power/Mode button once. Camera status lights flash, and sound indicator beeps.
To Power Off: Press and hold the Power/Mode button for two seconds. Status lights flash, and sound indicator beeps.
Inserting MicroSD Cards:
Slide the card into the slot with the label facing the front. It clicks into place.
To Remove: Place fingernail on the edge, press gently, and the card springs out.
Video Mode:
Modes: Video, Video + Photo, Video Looping. Use Power/Mode button to cycle. Use Settings/Tag button to open menus, and Shutter/Select button to choose options.
HiLight Tagging: Mark key moments while recording by pressing Settings/Tag button.
Photo Mode:
Modes: Single, Continuous, Night. Use Power/Mode to cycle modes. Use Settings/Tag to access menus.
Continuous: Hold Shutter/Select button to capture a series of photos.
Night: Customizable exposure time up to 30 seconds.
Shutter: Auto, 2, 5, 10, 15, 20, 30 seconds.
Multi-Shot Mode:
Modes: Burst, Time Lapse, Night Lapse.
Burst: Captures up to 30 photos in 1 second.
Time Lapse: Captures photos at specified intervals.
Night Lapse: Captures photos at specific intervals and exposure times, ideal for low-light conditions.
1. Remove the camera from The Frame.
2. Insert a microSD card (sold separately) with Class 10 or UHS-1 rating (up to 64GB) into the camera side door.
3. Open the bottom door, insert the battery, and close the door.
4. Connect to a computer or USB charger using the included USB cable. Status light indicates charging.
Powering On/Off:
To Power On: Press the Power/Mode button once. Camera status lights flash, and sound indicator beeps.
To Power Off: Press and hold the Power/Mode button for two seconds. Status lights flash, and sound indicator beeps.
Inserting MicroSD Cards:
Slide the card into the slot with the label facing the front. It clicks into place.
To Remove: Place fingernail on the edge, press gently, and the card springs out.
Video Mode:
Modes: Video, Video + Photo, Video Looping. Use Power/Mode button to cycle. Use Settings/Tag button to open menus, and Shutter/Select button to choose options.
HiLight Tagging: Mark key moments while recording by pressing Settings/Tag button.
Photo Mode:
Modes: Single, Continuous, Night. Use Power/Mode to cycle modes. Use Settings/Tag to access menus.
Continuous: Hold Shutter/Select button to capture a series of photos.
Night: Customizable exposure time up to 30 seconds.
Shutter: Auto, 2, 5, 10, 15, 20, 30 seconds.
Multi-Shot Mode:
Modes: Burst, Time Lapse, Night Lapse.
Burst: Captures up to 30 photos in 1 second.
Time Lapse: Captures photos at specified intervals.
Night Lapse: Captures photos at specific intervals and exposure times, ideal for low-light conditions.