Manual for HPN12XHM

Manual for HPN12XHM

Brand: Haier

Category: Aires Acondicionados

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:29 p.m.

Manual Publish Date: 2012-11-01

Warranty Information

Covers defects in workmanship or materials for 12 months on mechanical/electrical parts and 5 years on sealed system/compressor.

  • Before Use: Ensure proper outlet (115V, 15Amp), avoid direct sunlight and heating appliances, operate on a flat surface, keep free of obstructions, and maintain at least 1 foot from walls.
  • During Use: Unit starts in low fan cooling mode. Remembers last setting. Can operate as a dehumidifier. Wait 3 minutes after shutdown before restarting. Cooling mode typically does not require water removal; heating or high humidity may require emptying the tank. A 'Tank Full' light indicates the tank is full. Clean filter weekly.
  • After Use: Drain water tank if not used for a long period.

Troubleshooting and error codes

Problem Possible Cause & Solution
If air conditioner does not operate: Check if unit is plugged in.
Press "Reset" button on the plug.
Check if the electrical wall receptacle is the proper voltage.
Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.
Check if the unit is in "Off" mode.
If the "Tank Full" warning light is on, drain the water.
Air conditioner working but room not cooling: Room may have appliances that produce heat. Use an exhaust fan.
Check exhaust hose for proper installation.
Redirect the airflow. Remove any obstacles.
Close all doors and windows.
Air filter may be blocked or may need cleaning.
Unit BTU may be too low for the room.
On extremely hot & humid days, it may take longer to cool.
Unit may be in fan or dry mode. Select "Cool" mode.
Tank Full Warning Light Is On: Unit shuts down when the water pan is full. This can occur in high humidity or HEAT MODE. See "Operation" section under "During use" for draining instructions.
Privacy Policy