Manual for HCC2320AES

Manual for HCC2320AES

Brand: Haier

Category: Cooktops

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:10 p.m.

Manual Publish Date: 2015-03-01

Warranty Information

24-month full warranty covering defects in materials or workmanship, with specific exclusions.

Cooktop Operation:

Before First Use:

  • Clean the glass top with a dedicated cleaner.
  • A slight odor may be present initially.
  • Use appropriate cookware (flat bottom, sized to element).

Using the Cooktop:

  • Indicator lights show when cooking areas are hot.
  • Surface remains hot for up to 20 minutes after turning off.
  • Do not use aluminum foil directly on glass.
  • Do not boil pans dry.
  • Avoid sliding cookware to prevent scratches.
  • Cast iron cookware is not recommended.

Cookware:

  • Use pans with flat, evenly-sized bases.
  • Match pan diameter to radiant element.

Cleaning:

  • Ensure controls are off and surfaces are cool.
  • Use recommended cleaners like cooktop crème, BonAmi®, Soft Scrub®, or white vinegar.
  • Avoid flammable cleaners, caustic cleaners, abrasive cleaners, and powdery cleaners with bleach.

Troubleshooting and error codes

Problem Cause Possible Remedy
Nothing works Cooktop not connected to proper electrical circuit. Have electrician verify that the proper rated cooktop voltage is being supplied to the cooktop.
Fuse is blown or circuit breaker is tripped. Have electrician replace fuse or reset circuit breaker.
No electricity to the cooktop. Have electrician check your power supply.
Heating elements do not heat properly Cooktop is connected to 120 volt power supply. Have electrician connect cooktop to the proper rated cooktop voltage.
Power supply connection is loose. Have electrician tighten the connections at the junction box.
Improper cookware is being used. Select proper cookware as outlined in the Cooktop Operation section of this manual.
Heating elements cycle off even when elements are turned to their highest settings Heating element temperature limiters are temporarily shutting off the elements due to exceeding the maximum allowable temperature. This is a normal operating condition, especially during rapid heat-up operations. The element will cycle back on automatically after it has cooled sufficiently.
Glass ceramic surface is see through or appears to be red in color. Under direct or bright lighting, you will sometimes be able to see through the glass and into the chassis due to its transparent quality. You may also notice a red tint under these conditions These are normal properties of black ceramic glass panels.
Privacy Policy