Brand: Haier
Category: Dishwashers
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HDW300SS
Uploaded: Nov. 21, 2025, 9:19 p.m.
Warranty Information
No specific warranty period is mentioned in this section of the manual.
Starting the Appliance: After installation, turn on the water, partially open the door, and press the ON/OFF button. Select a wash cycle using the "G" button. Close the door to start. Cancelling/Changing Cycle: Open the door, press and hold "G" for 5 seconds. To set a new cycle, follow "Setting and Starting a Wash Cycle". End of Cycle: Six beeps will sound, and the indicator light "F" will extinguish. Open the door, turn off the appliance and water supply. Wait before removing dishes. Delay Start: Partially open the door, press "J" to select delay time (2h, 4h, 6h, 8h, 10h, 12h). The "I" indicator will blink during the delay. 1/2 Load: Press "C" to wash only the upper rack for smaller loads, saving water and energy. Not for heavy duty cycles.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher Does Not Start | Plug not fully inserted, no power, door not closed, ON/OFF switch off, water supply off. | Check plug, power, door, switch, and water supply. |
| Dishwasher Does Not Fill With Water | Water off, hose not connected, low water pressure, kinked hose, clogged filter. | Turn on water, connect hose, check pressure, straighten hose, clean filter. |
| Dishes Are Not Clean | Improper loading, too many items, items touching, insufficient detergent, wrong cycle, obstructed spray arm, blocked nozzles or filters, filters fitted incorrectly, drain pump jammed. | Load properly, reduce items, ensure space, add detergent, select appropriate cycle, check spray arm and nozzles, clean filters, check filter fitting, clear drain pump. |
| Dishwasher Does Not Drain | Drain hose crimped or bent. | Straighten the drain hose. |
| Lime Deposits or White Film | Rinse aid dosage incorrect. | Adjust rinse aid dosage. |
| Error Messages | Rapid blinking of "M" program LEDs indicate malfunctions. | For soak cycle light blinking: cancel cycle, check water and tap. For other lights blinking: turn off appliance, call for assistance, indicate flashing light. |