Brand: Haier
Category: Dishwashers
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for WQP12-AFM
Uploaded: Nov. 21, 2025, 9:24 p.m.
Warranty Information
Refer to the warranty card for specific details regarding warranty coverage.
Starting a wash cycle: Ensure the plug is in the socket, water supply is on, load the dishwasher, add detergent, select the cycle by rotating the knob, and press the ON-OFF button. If you forget dishes: Press ON-OFF to pause, add dishes, then press ON-OFF again to resume. At the end of the cycle: The knob will align with STOP. Turn off the appliance with ON-OFF, turn off water supply, and open the door. Wait a few minutes before unloading hot dishes. Cancelling/Modifying a cycle: Press ON-OFF, rotate knob to desired cycle, then press ON-OFF to restart.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The Dishwasher Does Not Start | Plug not correctly inserted; Power off; Door not closed; ON-OFF switch off; Water supply off. | Check plug, house power, door closure, ON-OFF switch, and water supply. |
| The Dishwasher Does Not Load Water | Water not on; Hose not connected; Insufficient water pressure; Hose crimped/bent; Water supply hose filter clogged. | Turn on water, check connection, ensure pressure, straighten hose, clean filter. |
| The Dishes Are Not Clean | Same as "Dishwasher Does Not Load Water" | Same as "Dishwasher Does Not Load Water" |
| The Dishwasher Does Not Drain | Drain hose crimped/bent. | Straighten drain hose. |
| Lime Deposits or a White Film Form on the Dishes | Salt container lid not closed; Rinse aid dosage incorrect. | Ensure salt lid is closed; Adjust rinse aid dosage. |