Manual for HLH266BB

Manual for HLH266BB

Brand: Haier

Category: Televisions

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:20 p.m.

Warranty Information

One year parts and labor warranty for home service for 32" and up; 26" carry-in. Excludes non-rechargeable batteries.

Switching On/Off the TV set

  1. First, connect power cord correctly.
  2. Select the viewing source by using INPUT button on the remote control.
  3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
  4. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

Choose the Menu Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

  1. Press the MENU button and then use ▲/▼ button to select the Function menu.
  2. Press the ▶ button and then use ▲/▼ button to select Menu Language.
  3. Press the ▶ button and then use ▲/▼ button to enter the list of available language. (English, Spanish or French)
  4. Select your language with the ▲/▼ button and press the OK button to confirm your selection.
  5. When you are satisfied with your choice, press the EXIT button to return to normal viewing or press MENU button to return to the previous menu.

Choose the Input source

Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

  1. Press the INPUT button to enter the Select Main picture Source menu and then use ▲/▼ button to select the desired items. (Cable TV, VIDEO1, VIDEO1, SVIDEO, YPBPR, VGA, HDMI.)
  2. Press the OK button to confirm.
  3. Press INPUT button to return to TV viewing or press EXIT button to return to the previous menu.

Note: According to your connection device, you can change the name of every source.

Troubleshooting and error codes

Issue Solution
No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available.
Blank screen Verify if correct signals are input. Press INPUT button to change signal input to TV input. Restart the television of power supply is interrupted.
No sound Press Mute button and verify if Mute mode is set. Switch to other channel and verify if the same problem happens. Press VOL+ button to see if the problem can be solved.
Poor sound Verify if sound system is correct. Refer to some chapter for adjust.
No picture in some channel Verify if correct channel is selected. Adjust the antenna. Make adjustments by Fine Tune and Manual Scan.
No color for some channel program (black and white) Verify if the same problem exists in other channels. Check out of picture and sound systems. Refer to relative instructions in the Manual for color adjust.
Spots with some or all pictures Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Make fine adjustment of channel.
Horizontal/vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool.
Television out of control Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance.
Privacy Policy