Manual for L32H8

Manual for L32H8

Brand: Haier

Category: Televisions

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:12 p.m.

Warranty Information

None

Switching ON/OFF the TV set

  1. Connect the power cord.
  2. Press POWER button to turn on.
  3. Press POWER button to enter standby.
  4. Disconnect power supply to completely cease operation.

Choose the Menu Language

  1. Press MENU, use VOL+/- to select Function Menu.
  2. Press CH+/-, select Language.
  3. Use VOL+/- to select desired language.
  4. Press MENU to return.

Choose the Input Source

  1. Connect external devices.
  2. Press TV/AV, use CH+/- to select TV, then VOL+/- to confirm.
  3. Ensure TV is in TV mode before watching programs.

Troubleshooting and error codes

Problem Possible remedies
No picture, no sound Turn on the power supply; Properly plug the TV set to the power socket; Check to see if the power cable of other appliance is plugged in the TV set. Make sure that the power cable of the TV set is properly connected.
Good picture, no sound Depress the volume button; Check out the audio frequency input signals.
Failure of remote controller Check to see if the remote controller display receiving window are blocked by other objects and if batteries are properly loaded.
No color, weak color or poor picture Designate the item of color from the Picture menu and depress the volume button; Keep the display and VCR separate a reasonable space; Activate some functions to store picture brightness; Make sure that the display and signal source are available and turned on.
Excessive brightness or darkness Adjust brightness or contrast.
Picture too big or small Adjust the setup of sizes.
One speaker failure Balance the sound in the menu.
Slight sound from display It is a normal phenomenon.
Privacy Policy