Manual for L32K3

Manual for L32K3

Brand: Haier

Category: Televisions

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:22 p.m.

Warranty Information

No specific warranty period is mentioned in this section.

Switching ON/OFF the TV set

  1. Connect power cord; indicator lights up.
  2. Press POWER on remote.
  3. Press POWER to enter standby.
  4. Disconnect power to cease operation.

Choose the Menu Language

  1. Press MENU, navigate to Function menu, select language with repeated presses of < / >.
  2. Press MENU to return.

Choose the Input source

  1. Press SOURCE on remote to display source menu.
  2. Use < / > to select TV, then press OK.

Searching Channel

  1. Press MENU, navigate to Tuning menu.
  2. Select Channel Edit, then OK.
  3. Select Auto Search or Prog. Exchange.

Troubleshooting and error codes

Problem Possible remedies
No picture, no sound Turn on power supply; Properly plug TV into socket; Check other appliance power cable; Ensure TV power cable is connected.
Good picture, no sound Depress volume button; Check audio frequency input signals.
Failure of remote controller Check remote display window and batteries.
No color, weak color or poor picture Designate color from Picture menu; Separate display and VCR; Activate picture brightness functions; Ensure display and signal source are available.
Excessive brightness or darkness Adjust brightness or contrast.
Picture too big or small Adjust the setup of sizes.
One speaker failure Balance the sound in the menu.
Slight sound from display It is a normal phenomenon.
Privacy Policy