Brand: HITACHI
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for AX-M910
Uploaded: Nov. 21, 2025, 6:50 p.m.
Warranty Information
Refer to the dealer for warranty information. Partmaster.co.uk is available for replacement parts.
Powering On/Off: Press the STANDBY button to turn the system on or off. The system remembers its last mode. For energy saving, switch to ECO Power Standby.
Basic Operations: Use function buttons (DVD, TUNER, USB, AUX) to select modes. Use Play/Pause, Stop, Next/Previous buttons for media playback. Adjust Volume with +/- buttons or control knob.
Disc Playback: Press Open/Close to load discs. The unit automatically reads and plays discs. Use 0-9, 10+ buttons to select tracks/chapters. Select playback modes (Repeat, Shuffle) with the MODE button.
Radio: Press TUNER to select radio function. Use tuning buttons to find stations. Store stations using the PROGRAM button.
Settings: Use SETUP to access menus for TV Display, OSD Language, Audio Setup, and Video Setup.
Troubleshooting and error codes
| Symptom | Possible Cause | Action |
|---|---|---|
| No sound is heard | Connections are incorrect, or loose; TV or power amplifier operates incorrectly; Amplifier's receiving signal position is wrong; Volume setting to minimum | Check all connections and make corrections; Check whether the operation is right; Check the position of receive signal; Adjust volume |
| No picture | Connections wrong or loose; TV Operation and setting is wrong; Audio connects wrong; DVD Player doesn't match the TV system | Check all connections and correct it; Check whether operation and setting is right; Check whether audio connections are right; Select the colour system in the “TV SYSTEM" function setting to select suitable system |
| Bad sound quality | Audio connects wrong | Check whether audio connections are right |
| Picture roll or without color | DVD Player doesn't match the TV system | Select the colour system in the “TV SYSTEM" function setting to select suitable system |
| The disc does not play | No disc in the tray; The disc is upside down; The disc is dirty or scratched; The unit is foggy inside | Place a disc; Place the disc with the printed side up; Clean or replace the disc; Take out the disc, turn on the unit for about an hour |
| Poor radio reception | The antenna is disconnected; The FM wire antenna is not properly extended and positioned | Reconnect the antenna securely; Extend FM wire antenna to the best reception position |
| The disc does not play | Dirty disc; The disc is upside down; Pause is engaged | Clean or replace the disc; Put the disc in with the label side up; Cancel the pause function |
| Unable to operate the remote control | The path between the remote control and the sensor of the unit is blocked | Remove the obstruction |
| Operations are disabled | The batteries have lost their charge; The built-in microprocessor has malfunctioned due to external electrical interference | Replace the batteries; Unplug the system then plug it back in |