Brand: HITACHI
Category: Audio
Document Type: Manual
Language: EN
Manual for DVP335E
Uploaded: Nov. 21, 2025, 6:33 p.m.
Warranty Information
No warranty information is available in this manual.
- Power Supply: Connect to 220-240V~ 50Hz AC outlet and press STANDBY to turn on.
- Disc Playback: Press OPEN/CLOSE to open tray, place disc label-up, press PLAY. Press STOP to stop playback.
- Basic Navigation: Use Arrow buttons to navigate menus, ENTER to confirm.
- Disc Navigation: Press DISC NAVIGATION to view chapter scenes. Use Arrow buttons to select, ENTER or PLAY to start.
- Pause/Step: Press PAUSE/STEP to pause playback or advance frame-by-frame. Press PLAY to resume.
- Resume Playback: Press STOP to pause, then PLAY to resume from the stopped point. Press STOP twice to cancel.
- Search Functions: Use SKIP buttons for track/chapter search. Use SEARCH MODE for Title/Chapter/Time search.
- Repeat Functions: Use REPEAT button for track, title, chapter, or disc repeat. Use A-B REPEAT for a specific section.
- Program Playback: In STOP mode, press MODE, program tracks using numerical buttons or arrow keys, then press PLAY.
- Audio/Subtitle Settings: Use AUDIO and SUBTITLE buttons to select languages and sound modes.
- Setup Menu: Press SETUP to access settings for display, language, audio, etc.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| No power | -Check if the AC power cord is properly connected. -Unplug the outlet once, and wait for 5-10seconds and then plug it in again. |
| No sound or picture | -Check if the TV is switched on. -Check the video connection. -Check the VIDEO/AUDIO cable connections to the TV (See Connecting to a TV). -Use a DIGITAL AUDIO OUT jack when outputting the DTS audio. |
| Distorted picture | -Sometimes a small amount of picture distortion may appear. This is not a malfunction. |
| Completely distorted picture or black/white picture with DVD | -Connect the player directly to the TV. -Make sure the disc is compatible with the DVD player. |
| No sound or distorted sound | -Adjust the volume. -Check that the speakers are connected correctly. |
| No audio at digital output | -Check the digital connections. -Check if the audio format of the selected audio language matches your receiver capabilities. |
| No sound and picture | -Check that the VIDEO/AUDIO cable is connected to the correct device (See Connecting to a TV). |
| Picture freezes momentarily during playback | -Check the disc for fingerprints/scratches and clean with a soft cloth wiping from center to edge. |
| Disc can't be played | -Clean the disc. -Clean the disc. -Ensure the disc label is facing up. -Check if the disc is defective by trying another disc. -Cancel the parental lock or change the control level. -Insert a correct disc that plays on this player. |
| No return to start-up screen when disc is removed | -Reset the player by switching the player off, then on again. |
| The player does not respond to the remote control | -Aim the remote control directly at the sensor on the front of the player. -Reduce the distance to the player. -Replace the batteries in the remote control. -Re-insert the batteries with their polarities (+/– signs) as indicated. |
| Buttons do not work or player stops responding | -To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. |
| Player does not respond to some operating commands during playback. | -Operations may not be permitted by the disc. Refer to the instructions of the disc. |
| DVD player cannot read CDs/DVDs | -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD player for repair. |