Brand: HITACHI
Category: Digital Camera
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for KP-F500PCL/SCL
Uploaded: Nov. 21, 2025, 6:04 p.m.
Warranty Information
Refer to the documentation for specific warranty information, as none is explicitly stated in this excerpt.
Overview
The KP-F500PCL/SCL are high-resolution, black and white CCD cameras with CameraLink output. They capture progressive scan images at 16 frames per second and are designed for various applications.
Key Features
- High Resolution: Utilizes a 2/3-inch CCD with 5,000,000 pixels for detailed images.
- Compact and Lightweight: Small SDR connector reduces size and weight.
- Power over CameraLink: KP-F500PCL supports power delivery via the CameraLink cable.
System Setup
Connect the camera to a frame grabber board using a CameraLink cable. The system example illustrates various configurations.
Functions and Operations
Modes and adjustments are controlled remotely via CameraLink. Key functions include external trigger settings (mode, polarity, source), output signal options (flash out, VD), electronic shutter control (preset and variable speeds), CameraLink configuration (Base/Medium), data bit depth, sync signal settings, gain, black level, and partial scan options.
Safety Precautions
Read all safety instructions carefully. Avoid water and moisture, ensure proper ventilation, use only the specified power source, and do not attempt to service the unit yourself. Unplug the device before cleaning or if it displays abnormalities.
Troubleshooting and error codes
| Troubleshooting Item | Possible Cause | Solution |
|---|---|---|
| No image | Camera not powered on. | Check power connection. |
| Image abnormalities (e.g., smear, noise) | Excessive light, high ambient temperature, interference. | Adjust camera aiming, ensure adequate ventilation, check for interference. |
| Communication error | Incorrect cable connection, software issue. | Verify CameraLink cable connection, check software settings. |