Manual for PW1

Manual for PW1

Brand: HITACHI

Category: TV

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:05 p.m.

Warranty Information

This warranty covers manufacturing defects for 12 months from the date of purchase, provided the product is used correctly.

Turning Power On and Off

  • To turn the monitor power ON, press the main power switch to ON, then press the SUB POWER button or the ON/OFF button on the remote control.
  • To turn the monitor power OFF, press the SUB POWER button or the ON/OFF button on the remote control, then press the main power switch to OFF.
  • During normal use, the main power switch is ON, and the monitor can be turned ON/OFF using the SUB POWER button or the ON/OFF button on the remote control.

Volume Adjustment

Use the VOL+ and VOL- buttons on the remote control (or the ▲ and ▼ buttons on the monitor unit) to adjust volume.

Audio Mute

Press the MUTE button on the remote control to temporarily mute the audio.

Input Switching

Switch inputs by pressing the RGB1, RGB2 buttons on the remote, or by pressing the INPUT SELECT button on the monitor.

Size Switching

Press the SIZE button on the remote or monitor to cycle through screen display sizes (Normal, Full, Zoom1, Zoom2, Zoom3).

Troubleshooting and error codes

Symptom Possible reason Remedy
snowy picture - poor sound (1) Connection of antenna cable to the TV is poor.
(2) Corroded or poor antenna connections.
(3) Antenna has moved position.
(4) Adverse weather conditions.
(5) Transmitter problems.		 (1) Make new connection and/or change antenna plug.
(2) Make new connections or renew cable.
(3) Re-align antenna.
(4) None.
(5) Check with local Operator.
multiple images - sound O.K (1) Antenna has moved position.
(2) TV not tuned correctly.
(3) Adverse weather conditions.
(4) Transmitter problems.
(5) AV Input not set correctly.		 (1) Re-align antenna.
(2) Re-tune or fine tune TV.
(3) None.
(4) Check with local Operator.
(5) Check the external equipment connected.
intermittent interference (1) Interference from electrical or mechanical motors, fluorescent lights, portable radios etc. (1) Check devices for shielding and renew if necessary or move further from TV.
no picture or sound (1) TV may be in AV mode.
(2) Picture/sound setting set to minimum.
(3) TV in standby or power save mode.		 (1) Press the INPUT SELECT button or ⑨ buttons on your remote control to return to normal TV mode.
(2) Check picture / sound controls (go to MAIN MENU).
(3) Press POWER ON / OFF button.
Privacy Policy