Brand: Honeywell
Category: Camera
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 2MP/4MP Low Light WDR IP Camera
Uploaded: Nov. 21, 2025, 7:34 p.m.
Manual Publish Date: 2018-06-01
Warranty Information
Honeywell will repair or replace defective products free of charge during the warranty period.
Accessing the Camera
- Install the IPC Tool Utility from the provided disc.
- Discover cameras on the network using IPC Tool.
- Assign static or dynamic IP addresses as needed.
- Upgrade camera firmware via IPC Tool.
- Access the camera's web interface through a browser.
Logging In and Viewing Live Video
- Log in using default credentials (admin/1234) and set a new secure password.
- Navigate the Live interface, adjusting settings like image brightness, contrast, and stream type.
- Use the quick access toolbar for common functions like Talk, Audio, Record, and Snapshot.
- Configure live video streaming settings for type and protocol.
- Log out when finished.
Troubleshooting and error codes
| Condition | Action |
|---|---|
| Power supply cord or plug is damaged | Unplug the unit and refer servicing to qualified personnel. |
| Liquid has been spilled or objects have fallen into the unit | Unplug the unit and refer servicing to qualified personnel. |
| Unit has been exposed to rain or water | Unplug the unit and refer servicing to qualified personnel. |
| Unit does not operate normally | Adjust controls covered by operating instructions. Improper adjustment may require qualified technician. |
| Unit has been dropped or enclosure is damaged | Unplug the unit and refer servicing to qualified personnel. |
| Unit exhibits a distinct change in performance | Requires service. |