Brand: Honeywell
Category: Camera
Document Type: Manual
Language: EN
Manual for HICC-0100P/HICC-0100N
Uploaded: Nov. 21, 2025, 7:02 p.m.
Warranty Information
Honeywell will repair or replace any defective products free of charge during the warranty period.
Live View
Live view is designed for general users to control the camera. In the left list it displays:
- Full Screen: Set Full screen
- Deinterlace
- One shot: take a picture from live view
- Manual Record
- Primary Stream & Secondary Stream: Two streams are available for selection among H.264, MPEG-4 and MJPEG.
Image Parameters
You can setup Basic Setting, Image Compression, Alarm, OSD, FTP/E-mail/SD Recording and Audio for your network IP camera by clicking on network setting on setting menu.
Troubleshooting and error codes
| Problem | Possible Solutions |
|---|---|
| Lens out of Optical Focus | 1. Verify that the lens cap has been removed from the camera. 2. This can also be cause by dirt, oil, grease, and fingerprints, and so on, that have accumulated on the lens or bubble. Check the lens and bubble, and then clean them, if needed. |