Brand: Honeywell
Category: Camera
Document Type:
Language: EN
Manual for Spotmatic
Uploaded: Aug. 9, 2025, 11:47 p.m.
Warranty Information
One year warranty against defects in material or workmanship.
Loading Film: Open camera back, place cassette, pull film leader to take-up spool, advance film until sprockets engage perforations, close back. Check rewind knob for counter-clockwise movement when advancing film.
Setting Exposure: Set film speed (ASA) on shutter speed dial. Select desired shutter speed. Turn diaphragm ring to match meter needle to center for correct exposure. Adjust shutter speed if needle is off-center.
Taking a Picture: Compose and focus using the viewfinder. Hold camera steady. Release shutter. Cock rapid wind lever for the next picture.
Rewinding Film: After last picture, unfold rewind crank. Depress rewind release button and turn crank to rewind film into cassette. Avoid direct sunlight.
Troubleshooting and error codes
| Meter needle not moving | Meter switch OFF | Turn meter switch ON. |
| Shutter speed index turns red | Settings outside meter range | Adjust shutter speed or film speed. |
| Photos overexposed | Shutter speed too slow or aperture too wide | Increase shutter speed or decrease aperture. |
| Photos underexposed | Shutter speed too fast or aperture too narrow | Decrease shutter speed or increase aperture. |
| Focus inaccurate | Incorrect focusing technique | Ensure subject is sharply in focus using microprism or ground glass. |