Brand: Honeywell
Category: Gas Detector Transmitter
Document Type: Manual
Language: EN
Available Languages: EN , ES
Brand: Honeywell
Category: Gas Detector Transmitter
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 6:36 p.m.
Manual Publish Date: 2020-03-01
Two years on LEL, CO, H2S, and O2 sensors; one year on other sensors.
| Problem | Possible Reasons & Solutions |
|---|---|
| Cannot connect to Device Configurator |
Reasons: Bluetooth not open, Password error, Old version of Device Configurator. Solutions: Enable Bluetooth, Update software, Re-establish link.
|
| Cannot turn on power after charging |
Reasons: Defective charging circuit, Defective battery. Solutions: Try charging again, Call service center.
|
| Lost password |
Solutions: Call Technical Support.
|
| Buzzer, LED lights inoperative |
Reasons: Buzzer disabled, Bad buzzer or LED. Solutions: Check LCD for "buzzer disabled" icon, Use Device Configurator App, Contact service center.
|
| "Lamp" message when power on. Lamp alarm. |
Reasons: Low ion concentration in PID lamp, defective lamp/circuit. Solutions: Turn off/on, Replace UV lamp.
|
| Pump failed message. Pump alarm. |
Reasons: Inlet probe blocked, direct connection to gas outlet with valve off, external filter issues, water condensation. Solutions: Remove blockages, reset alarm, replace filter, replace pump.
|
| RigRat LCD has no response when AC charger is connected |
Reasons: Bad AC charger/connection, long storage causing low battery. Solutions: Try another charger, connect again, allow trickle charge time.
|