Brand: Honeywell
Category: Other
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for ZW2004
Uploaded: Nov. 21, 2025, 8:39 p.m.
Manual Publish Date: 2018-11-30
Warranty Information
Two-year warranty from date of purchase, limited to repair or replacement.
Tools Required: Pliers, Screwdriver, Wire Strippers, Wire Nuts. Ensure power is OFF before starting. Identify Line and Load switches. Follow detailed wiring instructions for the primary and add-on switches, connecting to appropriate terminals (Line, Load, Neutral, Traveler, Ground). Ensure all connections are secure and follow wire gauge and stripping requirements. For multi-gang boxes, break off tabs as needed. Customize paddle color if desired. Mount switches, wallplates, restore power, and test.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not turn on | Power to circuit is OFF. | Ensure power is restored at the circuit breaker or fuse box. |
| Loose wire connections. | Check all wire connections to ensure they are secure. | |
| Incorrect wiring. | Refer to the wiring diagrams and ensure all wires are connected to the correct terminals. | |
| Add-on switch not responding | Add-on switch not paired with primary switch. | Refer to the primary switch manual for pairing instructions. |
| Power is OFF. | Ensure power is restored to the circuit. |