Brand: Hotpoint
Category: Dishwasher
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LTF 11H132
Uploaded: April 20, 2026, 8:06 p.m.
Warranty Information
Refer to the product fiche for energy efficiency and consumption data.
- Ensure the appliance is correctly installed and connected to water and electricity supplies.
- Before first use, set the water hardness and fill the salt and rinse aid dispensers if necessary.
- Load the dishwasher racks according to the instructions, ensuring items are stable and do not obstruct spray arms.
- Add detergent to the dispenser, selecting the appropriate amount based on soil level and cycle.
- Select the desired wash cycle and any options using the control panel.
- Close the door to start the cycle. The machine will indicate the end of the cycle with beeps and flashing lights.
- Wait a few minutes after the cycle ends before unloading to avoid burns. Unload from the bottom rack upwards.
- Regularly clean the filters, spray arms, and seals to maintain performance and prevent odors.
Troubleshooting and error codes
| Malfunction | Possible cause/Solution |
| Dishwasher does not start or does not respond to controls | Water tap is closed. Restart appliance and program after one minute. Plug not fully inserted or different socket needed. Door not closed properly. Baskets not fully inserted. Lock engaged; close door firmly. Program not finished. Drain hose is bent. Sink drain is blocked. Filter is blocked. Check drain hose height. |
| Dishwasher does not empty water. | Program not finished. Drain hose is bent. Sink drain is blocked. Filter is blocked. Check drain hose height. |
| Dishwasher is noisy. | Dishes are hitting each other or the spray arms. Adjust loading and check spray arm rotation. Excessive foam: incorrect detergent or dosage. Do not pre-wash by hand. |
| Limescale or white residue on dishes/glasses. | Salt is missing. Water hardness setting is incorrect; increase it. Salt container cap not closed properly. Rinse aid has run out or is insufficient. Too much rinse aid. |
| White residue or blue film on dishes/glasses. | Rinse aid dosage is excessive. |
| Dishes are not sufficiently dry. | Program without drying selected. Rinse aid has run out. Rinse aid setting is not appropriate. Dishes are made of non-stick material or plastic; water droplets are normal. |
| Dishes are not clean. | Dishes are not loaded correctly. Spray arms cannot rotate freely due to dishes. Program is too gentle. Excessive foam: incorrect detergent or dosage. Rinse aid cap not closed properly. Filter is dirty/clogged. Salt is missing. Plate height not compatible with basket setting. Spray arm holes are clogged. |
| Dishwasher does not fill with water, indicator lights are on. | No water in the supply or valve is closed. Water inlet hose is bent. Filters are clogged. Drain pipe is blocked. After checking/cleaning, switch off/on and start a new cycle. If problem persists, close water tap, unplug and contact service. |