Brand: HP
Category: Computer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LP2475w
Uploaded: Nov. 21, 2025, 7:16 p.m.
Warranty Information
Refer to the manual for specific warranty details. None provided in this excerpt.
Powering On/Off: Press the power button to turn the monitor on or off. The power indicator will light up green when powered on.
Adjusting Picture: Use the front panel control buttons (Menu, +, -, Input/Scan, Input/Quick Select, PIP/POP, Power) to navigate the On-Screen Display (OSD) menu and adjust settings like brightness, contrast, image position, color, and more.
OSD Navigation: Press 'Menu' to access the OSD. Use '+' and '-' buttons to navigate through menu items and adjust values. Press 'Menu' again to select a function.
Saving Settings: After adjusting, select 'Save and Return' to keep changes or 'Cancel' to discard them. 'Exit' closes the OSD menu.
Troubleshooting and error codes
| Section | Problem | Possible Cause | Solution |
|---|---|---|---|
| 9.2. Trouble Shooting | No picture | - Loose cable connection. - Monitor not powered on. - Wrong input selected. - Monitor defective. |
- Check cable connections. - Press Power button. - Select correct input using Input/Scan or Input/Quick Select button. - Contact service if defective. |
| 9.2. Trouble Shooting | Picture is distorted or abnormal | - Incorrect resolution or refresh rate. - Signal cable issue. - Monitor settings incorrect. |
- Select a factory preset display mode or adjust resolution/refresh rate. - Check and reseat signal cable. - Reset to factory defaults via OSD. |
| 9.2. Trouble Shooting | No power | - Power cord not plugged in. - Power outlet faulty. - Monitor defective. |
- Ensure power cord is securely connected. - Test power outlet with another device. - Contact service if defective. |