Manual for CW450t

Brand: HP

Category: Digital Camera

Document Type:

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 9, 2025, 11:53 p.m.

Manual Publish Date: 2010

Warranty Information

Contact original point of purchase or HP reseller for warranty service. Warranty claims require dated sales receipt.

Taking Photos: Power on the camera, frame the shot, and lightly press the Shutter button to focus. Press fully to capture. If a shake warning appears, stabilize the camera.

Using Voice Recording: From the Scene menu, select Voice, press the Shutter button to start, and press again to stop.

Setup Menu: Access via the Menu button, then the tab button to enter Setup. Configure settings like Sounds, Power Save, and LCD Save. Tap OK to save.

Connections: Connect to a TV or PC using the USB/AV cable. For PC, select 'Computer' in the USB mode menu.

Troubleshooting and error codes

Problem	Cause and/or Action
Camera does not turn on.	The batteries may be exhausted. Charge or replace the batteries.
Camera turns off automatically.	Press any button except the Power button to power on the camera.
LCD turns blank.	Press any button except the Power button to turn on the LCD.
Empty battery icon is displayed on the LCD, and then the camera turns off.	One or both of the batteries may be exhausted. Charge or replace the batteries.
LCD screen displays 'No images in memory'.	The image file on the memory card. Image file format may not be supported.
LCD screen displays 'Not available for this file'.	Function is only available for specific file types. File format is not supported.
LCD screen displays 'Memory full'.	Memory card is full. Replace the memory card with a new one or delete unnecessary images.
LCD screen displays 'File locked'	This file is locked. Unlock the file.
LCD screen displays 'Card locked'.	The memory card is protected. Remove the card and slide the write-protect switch to it's unlock position.
LCD screen displays 'CARD HAS WRONG FORMAT'	The memory card is protected. Remove the card and slide the write-protect switch to it's unlock position.
LCD screen displays 'Copy error'.	The memory card is protected. Remove the card and slide the write-protect switch to it's unlock position. The memory card is full. Replace card or delete unnecessary files.
The lens is extended and will NOT retract.	Do not force the lens to go back. The type of the battery used may be incorrect or the battery power level is too low. Change the battery or charge the battery before using the camera.