Brand: HP
Category: Digital Camera
Document Type:
Language: EN
Manual for Photosmart E317
Uploaded: Aug. 9, 2025, 11:55 p.m.
Manual Publish Date: 2005-01-01
Warranty Information
Warranty information is subject to change and is detailed in the express warranty statements accompanying the product.
Getting Started
1. Attach the Wrist Strap: Secure the wrist strap to the designated mount on the camera.
2. Install the Batteries: Open the battery compartment, insert batteries, and close the compartment.
3. Turn on the Camera: Slide the lens cover open to power on the camera. Slide it closed to turn it off.
4. Choose the Language: Select your preferred language from the prompt that appears on first startup.
5. Set the Date and Time: Configure the date and time settings for accurate photo information.
6. Install and Format a Memory Card (Optional): Insert and format an optional memory card for expanded storage.
7. Install the Software: Install the HP Image Zone software from the CD for image transfer and management.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not turn on | Batteries are dead or not inserted correctly. | Replace or recharge batteries. Ensure batteries are inserted correctly. |
| Images are blurry | Lens is dirty or camera shake. | Clean the lens. Use a tripod or hold the camera steady. |
| Cannot transfer images | USB cable is not connected properly or software issue. | Check USB connection. Ensure HP Image Zone software is installed correctly. |
| Error message on camera | Various internal errors. | Turn the camera off and then on again. If the problem persists, refer to the "Troubleshooting and Support" section. |