Manual for Photosmart R817/R818

Brand: HP

Category: Digital Camera

Document Type:

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 9, 2025, 11:54 p.m.

Warranty Information

Refer to the express warranty statements accompanying the product for warranty information.

This section guides you through the initial setup of your HP Photosmart R817/R818 digital camera.

Install Camera Dock Insert (Optional): For HP Photosmart R-series dock users, ensure the correct insert is used. Refer to the dock's manual for connection instructions.
Attach Wrist Strap: Secure the wrist strap to the designated mount on the camera's side.
Install the Battery: Open the battery/memory card door, insert the rechargeable HP Photosmart R07 Lithium Ion battery, and close the door.
Charge the Battery: Connect the AC adapter to the cradle and place the camera in it. The Power light will blink while charging. A full charge takes 4-6 hours.
Turn on the Camera: Slide the ON/OFF switch to the right. The lens will extend, and the Power light will turn solid blue.
Choose Language and Region: Follow on-screen prompts to select your preferred language and region.
Set Date and Time: Input the correct date and time, and confirm the settings.
Install and Format Memory Card: Insert a memory card and format it for optimal performance.
Install Software: Install the HP Image Zone software from the included CD for image transfer and camera configuration.

Refer to specific page numbers for detailed instructions.

Problem	Possible Cause	Solution
Camera does not turn on	Battery is low or not inserted properly.	Charge the battery or reinsert it.
Cannot take pictures	Memory card is full or not inserted.	Insert a memory card or delete existing images.
Images are blurry	Camera shake or incorrect focus setting.	Hold the camera steady or adjust focus settings.
Cannot transfer images to computer	USB cable not connected properly or software not installed.	Check USB connection or install HP Image Zone software.