Brand: HP
Category: Networking
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for D2600/D2700
Uploaded: Nov. 21, 2025, 9:10 p.m.
Manual Publish Date: 2010-02-01
Warranty Information
Obtain a copy of the warranty for this product from the warranty information website.
Overview
The HP StorageWorks D2600/D2700 Disk Enclosure is a 6Gb SAS disk enclosure available in two models: Small Form Factor (SFF) supporting 25 drives and Large Form Factor (LFF) supporting 12 drives. It supports various deployment types including single and dual domain, server attached, and controller enclosure attached configurations. The manual covers installation, cabling, configuration, operation, and troubleshooting.
Key Features
- Supports 25 SFF or 12 LFF drives
- 6Gb SAS interface
- Hot-pluggable drives and power supplies
- Status LEDs for health, fault, and drive activity
- UID button for identification
Troubleshooting and error codes
| Scenario | Diagnostic Steps |
|---|---|
| Enclosure does not initialize | Check power connections. Verify power supply LEDs are on. Check I/O module LEDs. Consult the relevant sections in this guide. |
| Enclosure front fault LED is amber | Identify the specific component causing the fault using other LEDs or error messages. Refer to the troubleshooting section for detailed steps. |
| Enclosure rear fault LED is amber | Identify the specific component causing the fault. Refer to the troubleshooting section for detailed steps. |
| Power on/standby LED is amber | Indicates the enclosure is in standby mode or a power issue. Check power connections and refer to power supply troubleshooting. |
| Power supply LED is amber | Indicates a power supply fault. Hot-replace the power supply if necessary. |
| I/O module fault LED is amber | Indicates a fault with the I/O module. Check connections and refer to I/O module troubleshooting. |
| Fan LED is amber | Indicates a fan failure. Replace the fan module. |
| Disk drive failure | Recognize drive failure through drive LEDs or system management tools. Follow replacement procedures. |