Brand: HP
Category: Projector
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for xp7010/xp7030
Uploaded: Nov. 21, 2025, 6:33 p.m.
Manual Publish Date: 2005-11-01
Warranty Information
Refer to the manual for specific warranty information and contact HP for details.
Setting Up the Projector:
1. Place the projector on a stable platform 1.2 to 10 m (4 to 33 ft) from the screen.
2. Connect the power cord to the projector and a grounded outlet.
3. Turn on the disconnect switch on the projector.
Connecting a Computer:
Requires a VGA cable or other video source cable, and optionally a USB cable and audio cable.
Connecting a Video Source:
Connect using DVI, component-video, S-video, or composite-video connections, choosing the highest quality available.
Turning the Projector On and Off:
Use the power button on the projector.
Troubleshooting and error codes
| Problem | Remote control does not operate |
|---|---|
| Solution | Ensure nothing blocks the receiver, aim the remote, move closer (within 8m/26ft), ensure direct line of sight, or replace the battery. Run the remote control test via Help > Diagnostics. |
| Problem | Warning light problems |
| Solution | Refer to the 'Warning light problems' section on page 55 for specific light meanings and troubleshooting. |
| Problem | Start-up problems |
| Solution | Refer to the 'Start-up problems' section on page 56. |
| Problem | Picture problems |
| Solution | Refer to the 'Picture problems' section on page 56. |
| Problem | Sound problems |
| Solution | Refer to the 'Sound problems' section on page 59. |
| Problem | Interruption problems |
| Solution | Refer to the 'Interruption problems' section on page 59. |